Disclosure: As an Amazon Associate, we earn from qualifying purchases. If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you.
Keeping cigars at a steady humidity level can be difficult when your humidor seal, room climate, and opening habits all affect moisture loss. The Boveda 69% Humidity Control Pack, Size 60 offers a simple two-way system that can add or absorb moisture without water refills or electronic controls. It is especially suited to airtight cigar storage and smaller humidors, but the 69% target is not the right choice for every storage setup. This review explains its size, capacity, lifespan, setup, limitations, and the buyers who are most likely to benefit.
Quick Verdict
Rating: 8/10, Recommended with caveats
Best For: Airtight humidors, tupperdors, travel humidors, and cigar cases that suit a 69% RH target.
Bottom Line: Size 60 is easy to place, needs no power, and automatically manages moisture in both directions. Its main limitation is that lifespan and actual humidor RH depend on the seal, container type, climate, and how often you open the humidor.
| Specification | Detail |
|---|---|
| Brand | Boveda |
| Product | 69% RH Humidity Control Pack |
| Size | Size 60 |
| Target humidity | 69% relative humidity |
| Dimensions | 5.25 × 3.5 inches |
| Pack weight | 60 g |
| Cigar capacity | One Size 60 for a humidor designed to hold up to 25 cigars |
| Pipe tobacco use | Up to 1 lb of English, flake, and other non-flavored pipe tobacco |
| Humidity action | Two-way, releases or absorbs moisture as needed |
| Ingredients | Food-grade salt, purified water, and food-grade thickening agent |
| Power | None required |
| Packaging | Single pack, individually overwrapped |
| Typical lifespan | About 2 to 4 months in a wood humidor; longer in tighter storage |
| Replacement cue | Replace when the whole pack feels rock solid at room temperature |
What Is the Boveda 69% Humidity Control Pack?
The Boveda 69% Size 60 is a passive humidity-control packet for cigar storage. Instead of using a wet sponge, crystals, or an electronic humidifier, you place the sealed brown packet in the storage space and close the container. The packet works without batteries, water refills, or manual adjustments.
The “69%” refers to the target relative humidity. The Size 60 format measures about 5.25 × 3.5 inches and is intended for a humidor with capacity for up to 25 cigars. Boveda also lists the 69% Size 60 for certain pipe-tobacco storage applications, including up to 1 pound of English, flake, and other non-flavored pipe tobacco.
Key Takeaways
- Simple setup: remove the clear outer overwrap, keep the brown packet sealed, and place it in the closed storage container.
- Two-way control: the pack can release moisture when the environment is dry and absorb moisture when it is too humid.
- Size 60 capacity: one pack is intended for a humidor designed to hold up to 25 cigars.
- Lifespan varies: a wood humidor may use a pack in roughly 2 to 4 months, while more airtight storage can extend service life.
- Replace, do not recharge: once the pack becomes fully rigid at room temperature, replace it rather than soaking or rehydrating it.
Who Should Buy It?
Best For
- Cigar owners using a tight-seal wood or acrylic humidor, tupperdor, travel humidor, or cigar case.
- Buyers who want humidity control without refilling sponges, gels, or reservoirs.
- Smaller collections where one Size 60 matches the container’s cigar capacity.
Skip If
- Your humidor requires a different RH level, such as a drier 65% setup or a higher-humidity option.
- Your container is poorly sealed and loses moisture quickly without fixing the underlying seal issue.
- You need a humidity pack for a different category with its own recommended RH range.
Before You Buy: Do not assume 69% RH is the right target for every product or every humidor. Match the RH level and pack quantity to the container and the item you are storing, and do not mix different RH packs in the same container.
Why Choose the Boveda 69% Humidity Control Pack?
The main advantage is convenience. The pack has no settings, fan, reservoir, or electrical parts. Once the clear overwrap is removed, the brown packet can be placed in the humidor and left to regulate moisture while the container remains closed.
The Size 60 format is also easy to plan around. One pack is sized for up to a 25-count humidor, and larger humidors can use additional Size 60 packs based on total cigar capacity. This makes it easier to scale humidity control without guessing how much water or gel to add.
Two-Way Humidity Control
Unlike a basic humidifier that only adds moisture, Boveda is designed to work in both directions. It releases moisture when the enclosed air is too dry and absorbs moisture when it rises above the target. In a properly airtight environment, Boveda states that its packs operate within about ±2% of the printed RH.
Low-Maintenance Design
You do not have to rewet the pack. The better approach is to monitor it by touch and replace it as it becomes exhausted. Corners or isolated areas can harden while the pack is still working, but a pack that is rock solid all the way through at room temperature is due for replacement.
What Items Will Benefit From Boveda’s Humidity Control?
This specific 69% Size 60 pack is most clearly suited to cigar storage. Boveda lists it for tight-seal wood humidors, acrylic humidors, tupperdors, coolerdors, plastic travel humidors, cigar cases, and refilling Boveda Humidor Bags. One Size 60 is intended for a humidor designed to hold up to 25 cigars.
It is also listed for up to 1 pound of English, flake, and other non-flavored pipe tobacco. That is more specific than treating the 69% pack as a universal humidity solution for all herbs, foods, or moisture-sensitive goods.
How Does the Boveda Two-Way Humidity Control Work?
The sealed packet contains a salt-and-water solution with a thickening agent. Through its membrane, the pack exchanges moisture with the enclosed air so the storage environment moves toward the printed RH level. Because the process is passive, it does not require sensors, power, or user-adjustable controls.
Container quality still matters. Boveda notes that a humidor can stabilize below the printed RH when the seal is weak or the surrounding air is very dry. For that reason, a humidity pack should not be used as a substitute for fixing a clearly leaky humidor.
Pro Tip: Size the pack to the humidor’s rated cigar capacity, not just the number of cigars currently inside. For a 75-count humidor, for example, the manufacturer’s guidance is three Size 60 packs.
How It Performs in Real Use
In an Airtight Tupperdor or Acrylic Humidor
This is one of the strongest use cases for 69% RH. A tight seal reduces moisture loss, so the pack has less work to do and can regulate the smaller enclosed air volume more efficiently. You also avoid the routine of topping up a conventional humidifier.
In a Wood Humidor
Wood can absorb moisture, especially when a humidor is new, dry, or poorly seasoned. In this setting, a Size 60 pack may last closer to the shorter end of its expected service life. If packs become rigid unusually quickly, the humidor may need seasoning, additional packs, or a closer look at the seal.
For Travel Storage
The flat packet is convenient for travel humidors and cigar cases because it does not contain loose water that can spill. Keep the travel container closed as much as practical, since frequent opening exposes the interior to outside air and makes the pack work harder.
For Long-Term Storage
The main benefit is consistency rather than constant adjustment. You still need to inspect the pack periodically and replace it before humidity protection lapses. Long-term use is easiest when you keep spare sealed packs available and store unopened units in their original packaging.
Tips for Application and Maintenance
- Remove only the clear overwrap. Do not cut or open the brown humidity-control packet itself.
- Use the correct quantity. One Size 60 is intended for up to 25 cigars of humidor capacity.
- Keep the container closed. Frequent opening increases the amount of outside air the pack must correct.
- Do not mix RH levels. Different humidity targets in the same humidor work against one another.
- Do not combine it with another humidifier. A sponge, gel, beads, or another active humidification source can reduce the efficiency of the two-way system.
- Use the touch test. Replace the pack when it is fully hard throughout at room temperature.
Materials and Safety
Boveda lists food-grade salt, purified water, and a food-grade thickening agent inside the packet. The sealed pack is designed to be safe for direct contact with cigars, but you should not tear open the brown membrane.
Do not try to recharge an exhausted pack by soaking it in water. Boveda advises replacement because rehydration can reduce humidity precision and may create leakage or contamination risks. If the outer packet is damaged or leaking, remove it rather than continuing to use it.
Benefits and Drawbacks of the Boveda Pack
The biggest strength is that it simplifies humidity management. You do not have to add water, tune a dial, or power a device. The fixed 69% target also reduces guesswork for storage environments where that RH level is appropriate.
The tradeoff is that the pack is consumable and its service life depends on the environment. A dry or leaky wood humidor can use up a pack faster than a tight acrylic or plastic container. You also need to select the correct RH level before buying rather than expecting one pack to fit every storage need.
Pros and Cons
Pros
- Two-way moisture control can add or absorb humidity.
- No batteries, refilling, distilled water, or manual settings.
- One Size 60 is easy to match to a 25-count humidor.
- Flat 5.25 × 3.5-inch format fits many storage containers.
- Clear replacement cue when the entire pack becomes rigid.
Cons
- Consumable packs need periodic replacement.
- Service life shortens when the container leaks or the surrounding air is very dry.
- 69% RH is not the correct target for every humidor or storage category.
Is It Worth the Price?
The Boveda Size 60 makes the most sense as a convenience purchase. You are paying for a pre-set, passive system that avoids the maintenance of water-based humidifiers and removes the need to manually balance moisture.
It offers stronger value for smaller cigar collections, travel storage, and airtight containers where one pack matches the required capacity. It is less attractive if your humidor has a poor seal, because repeated early replacement can raise long-term cost without solving the underlying problem.
How It Compares to Alternatives
The closest alternatives are other Boveda RH levels rather than a completely different system. A 65% pack suits buyers who prefer a drier cigar profile, while 72% can make more sense for humidors that need a higher moisture target. Boveda also offers a 75% option for draftier conditions.
The 69% Size 60 stands out when you want a moderate RH target for an airtight humidor, tupperdor, travel humidor, or cigar case. The best choice is the RH level that matches your container and storage goal, not simply the highest percentage available.
Frequently Asked Questions
How many cigars can one Boveda Size 60 protect?
One Size 60 is intended for a humidor designed to hold up to 25 cigars. For larger humidors, use additional Size 60 packs based on the humidor’s total rated capacity.
How long does a Boveda 69% Size 60 last?
In a wood humidor, Boveda lists a typical life of about 2 to 4 months. Airtight acrylic or plastic storage can last longer, while dry climates, frequent opening, or a weak seal can shorten service life.
When should I replace the pack?
Check it at room temperature. Hard corners or a few firm spots do not mean it is finished, but a pack that is rock solid all the way through should be replaced.
Can I recharge a dry Boveda pack?
Boveda recommends replacing exhausted packs rather than rehydrating them. Soaking a used pack can reduce humidity precision and may increase the chance of leakage or unwanted contamination.
Can Boveda touch cigars directly?
Yes. The manufacturer states that the intact Boveda pack is safe to touch cigars. Remove the clear outer overwrap before use, but do not cut open the brown packet itself.
Can I mix 69% packs with a different RH level?
No. Different RH packs will work against each other as each tries to maintain its own target. Use one RH level throughout the same humidor.
Is 69% RH right for every cigar humidor?
No. Boveda offers several cigar-storage RH levels because the ideal choice depends on your humidor type, seal, climate, and preference. The 69% pack is particularly well suited to airtight storage.
The Bottom Line
The Boveda 69% Humidity Control Pack, Size 60 is a practical choice for cigar owners who want passive, two-way humidity control in a tight-seal container without refilling a humidifier. It is easy to size for smaller humidors and simple to replace, but you should choose another RH level if 69% does not match your storage setup and address a poor humidor seal rather than relying on faster pack replacement.
