Disclosure: As an Amazon Associate, we earn from qualifying purchases. If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you.
Choosing the right humidity pack is less about buying the highest RH number and more about matching the pack to your humidor and environment. The Boveda 72% Humidity Control Packs, Size 60, 12-Ct are designed for situations where a humidor runs dry, leaks more air than an airtight container, or needs a slightly higher moisture target. They offer automatic two-way humidity control without refilling water, gels, or beads. The main limitation is important: 72% RH is a specialized choice, so buyers with a well-sealed humidor may be better served by a lower Boveda RH level.
Quick Verdict
Editorial Rating: 8.5/10
Best For: Drafty wood humidors, dry climates, higher altitudes, and users who intentionally want a 72% RH target.
Bottom Line: Boveda 72% Size 60 packs provide simple, maintenance-free two-way humidity control and clear sizing guidance. They are easy to use, but 72% RH is not the best target for every humidor, so choosing the correct RH level matters as much as choosing the pack itself.
| Specification | Detail |
|---|---|
| Brand | Boveda |
| Model | B72-60-OWC |
| Product type | Two-way humidity control packets |
| Target humidity | 72% RH |
| Size | Size 60 |
| Individual packet size | Approximately 5.25 × 3.5 inches |
| Pack quantity | 12 packets |
| Packet capacity guidance | One Size 60 pack for every 25 items of humidor capacity |
| Humidity action | Absorbs or releases moisture as conditions change |
| Power source | Self-contained, no electricity or batteries |
| Replacement cue | Replace when the packet becomes hard throughout |
| Best use | Drafty humidors, dry environments, or a deliberately higher cigar moisture profile |
Key Takeaways
- Boveda 72% RH is a specialized humidity level. It makes the most sense for dry environments, drafty humidors, or users who prefer a higher moisture profile.
- Each Size 60 packet is rated for up to 25 items of humidor capacity. A 100-count humidor therefore typically calls for four Size 60 packs.
- The system works in both directions. It can release moisture when the enclosure becomes too dry and absorb moisture when conditions rise above the target.
- No water refills are required. You remove the clear overwrap, leave the brown packet sealed, place it in the humidor, and close the enclosure.
- Do not mix RH percentages. Using 72% packs together with another Boveda RH level can make the products work against each other.
- Replacement depends on the enclosure. The Amazon listing recommends about three months, while Boveda notes that pack life can vary with humidor type and environmental conditions.
What Is the Boveda 72% Humidity Control Pack?
The Boveda 72% RH Size 60 is a self-contained humidity control packet made to stabilize moisture inside an enclosed storage space. Instead of adding only moisture like a sponge or traditional humidifier, Boveda uses a two-way system. It releases water vapor when conditions are too dry and absorbs moisture when humidity rises above its intended equilibrium.
This specific Amazon package contains 12 Size 60 packets. Each packet is approximately 5.25 × 3.5 inches, and Boveda recommends one Size 60 for every 25 items of humidor capacity. That means the full 12-pack can cover several smaller humidors or provide enough packets for a large-capacity setup when used according to the sizing rule.
The key detail is the 72% RH target. This is not Boveda’s universal cigar-storage level. It is intended more specifically for dry environments, drafty humidors, or users who want their stored cigars at a somewhat higher moisture profile.
Who Should Buy It?
Best For
- Wood humidors that lose humidity faster than expected.
- Users in dry climates or higher-altitude locations.
- Buyers who intentionally prefer a higher cigar moisture profile.
Skip If
- Your airtight humidor already holds its target RH easily.
- You prefer the more commonly recommended 69% RH cigar-storage level.
- You need a pack for seasoning an empty wood humidor, which calls for a different RH product.
Before You Buy: Do not choose 72% simply because it sounds more protective. A higher RH target is not automatically better. Match the RH level to your humidor, climate, and preferred cigar storage conditions.
How Do Boveda Packs Work for Humidity Control?
Boveda uses a two-way humidity control system rather than a one-direction humidifier. When the air in your closed humidor is too dry, the packet releases water vapor. When humidity becomes higher than the pack’s target, it can absorb moisture. The goal is to reduce the repeated swings that happen when you manually add water to a sponge, gel, or bead system.
The packet does not need electricity, batteries, a reservoir, or routine refilling. It contains purified water, salts, and a thickening agent sealed behind a membrane that allows controlled water-vapor movement.
You should not expect every humidor to display exactly 72% at all times. Seal quality, surrounding climate, how often the lid opens, the amount of wood inside the enclosure, the number of packs used, and hygrometer accuracy can all affect the reading. Boveda states that its packs are designed to maintain their labeled RH within a narrow range in an airtight environment, but real wood humidors can behave differently.
Why 72% RH Can Help in a Dry or Drafty Humidor
A wood humidor exchanges moisture with its surroundings. If the room is very dry or the humidor does not seal tightly, the enclosure can lose water vapor faster than a more airtight acrylic or plastic container. A 72% Boveda pack gives you a higher starting humidity target to help compensate for those conditions.
This can be useful when a lower-RH pack consistently leaves your properly sized humidor below the level you want. It can also suit users who intentionally prefer cigars with a slightly higher moisture profile.
The tradeoff is that a well-sealed humidor may not need 72%. Boveda identifies 69% RH as its broadly recommended cigar-storage level and positions 72% as a more specialized option. That distinction is one of the most important buying points in this review.
Size 60 and the 12-Pack: How Many Do You Need?
Boveda’s sizing guidance for this Size 60 product is straightforward: use one packet for every 25 items your humidor is designed to hold. The calculation is based on humidor capacity, not simply the number of cigars currently inside it.
- A 25-count humidor: 1 Size 60 pack.
- A 50-count humidor: 2 Size 60 packs.
- A 75-count humidor: 3 Size 60 packs.
- A 100-count humidor: 4 Size 60 packs.
- A 300-count humidor: up to 12 Size 60 packs.
Using too few packs can make stabilization slower and may leave the system struggling against dry wood or outside air. Using the recommended quantity is especially important in a wooden humidor because the enclosure itself can absorb moisture.
Pro Tip: Size your Boveda packs to the humidor’s rated capacity, not to how many cigars happen to be inside today. If you have a 100-count humidor holding only 40 cigars, the manufacturer guidance still points to four Size 60 packs.
Using Boveda Humidity Packs Effectively
Setup takes only a few steps, but one mistake can ruin a packet. Remove the clear plastic overwrap if your packs are individually wrapped. Do not cut, tear, puncture, or open the brown Boveda packet itself.
Place the required number of packs inside your humidor and close the lid. Boveda says the packs may be positioned under a tray, on top of cigars, or in a compatible Boveda holder, provided air can circulate around the storage area.
Avoid placing a Boveda pack in the same humidor with another humidification system. Sponges, gels, beads, or packs at a different RH can work against the Boveda system and shorten its useful life.
How It Performs in Real Use
In a Drafty Wood Humidor
This is one of the strongest use cases for the 72% version. Wood and an imperfect seal can pull humidity away from the storage area, particularly during dry weather. Using the recommended number of Size 60 packets gives the system enough capacity to respond without requiring you to refill a reservoir.
In a Dry Climate or at Higher Altitude
Dry ambient air creates a larger moisture difference between the room and the inside of the humidor. The 72% version is specifically positioned for these conditions. Pack life may be shorter when the humidor constantly loses moisture, so the touch test becomes more useful than relying on a calendar alone.
In an Airtight Acrylic or Plastic Container
A very well-sealed enclosure usually loses less moisture. In this situation, 72% may produce a higher moisture profile than many cigar owners want. Boveda’s 69% option is the more general recommendation for cigar storage, so compare the RH choices before assuming the 72% pack is the better option.
For Multiple Humidors
The 12-count package is convenient when you maintain several smaller humidors. Because each Size 60 pack handles up to 25 items of rated capacity, you can divide the packets among different enclosures as long as each one receives the correct quantity and the same RH percentage is used within each enclosure.
Placement Tips for Better Results
- Remove only the clear wrapper. The brown humidity-control packet stays sealed.
- Use enough packets. Follow the one Size 60 per 25-item-capacity rule.
- Allow air circulation. Do not completely block tray vents or pack surfaces with tightly packed contents.
- Keep RH levels consistent. Do not combine 72% packs with 65%, 69%, 75%, 84%, or another RH level in the same enclosure.
- Do not combine humidification systems. Remove sponges, gels, beads, or similar moisture devices when using Boveda.
- Give a new setup time to stabilize. Humidor wood, dry contents, and room conditions can make the first adjustment slower than later maintenance cycles.
When to Replace Your Boveda Packs
The Amazon listing recommends replacing these 72% packs about every three months. Boveda’s broader cigar guidance notes that pack life varies by enclosure and says packs in wood humidors often last roughly two to four months, while packs in better-sealed acrylic or plastic containers can last longer.
The most reliable replacement signal is the packet’s texture. A new pack is soft and flexible. Some hardened areas or corners can develop during normal use. When the entire packet becomes rigid and crunchy with no soft areas remaining, it is time to replace it.
Do not try to recharge a spent Boveda pack by soaking or spraying it with water. Boveda advises replacing exhausted packs rather than rehydrating them, because adding uncontrolled water can interfere with the product’s intended humidity balance.
Storing Unused Packs
This 12-count version contains individually overwrapped packets. Keep unused units sealed in their original plastic overwrap until needed. If you have unwrapped unused Boveda packs, store them in a tightly sealed container to limit moisture exchange with the room.
Materials and Safety
Boveda describes its humidity packs as containing purified water, natural salts, and a food-grade thickening agent inside a leak-resistant membrane. The manufacturer also states that the packets can safely touch cigars and other compatible stored products when the packet itself is intact.
Do not cut open the brown packet or use a damaged pack. If a packet is torn, leaking, or punctured, remove it and replace it rather than placing it back into the enclosure.
Boveda also describes its products as food safe, but that does not mean 72% RH is automatically the right humidity setting for every type of food. The target RH still needs to match whatever product you intend to store.
Pros and Cons
Pros
- Two-way control can both add and absorb moisture.
- No water reservoir, sponge, beads, electricity, or batteries required.
- Clear one Size 60 per 25-item-capacity sizing rule.
- 12 individually overwrapped packets are convenient for multiple humidors or replacement cycles.
- 72% RH is specifically useful for dry environments and drafty humidors.
Cons
- 72% RH may be too high for buyers who prefer the more common 69% cigar-storage target.
- Drafty or very dry wooden humidors can use up packs faster.
- You need multiple Size 60 packs for larger humidors, so sizing the setup correctly matters.
Is It Worth the Price?
The 12-count package makes the most sense when you know 72% RH is the correct target for your setup. It can be a practical value for someone maintaining multiple humidors, a larger wood humidor, or a dry-climate setup that consumes packs regularly.
The main value is convenience rather than complexity. You do not have to measure and add distilled water, maintain a sponge, refill beads, or repeatedly adjust a conventional humidifier. You install the correct number of packs and replace them when they harden.
It is less compelling if you have one small airtight humidor and are unsure whether you even need 72% RH. In that case, choosing the correct humidity target first may save you from buying a larger quantity of the wrong pack.
How It Compares to Alternatives
Boveda 69% RH is the better starting point for many general cigar-storage setups because Boveda identifies it as its most broadly recommended cigar RH. Boveda 65% RH is aimed at buyers who prefer a drier cigar profile, while Boveda 72% RH makes more sense when your environment or humidor tends to run dry.
Do not confuse maintenance packs with Boveda 84% RH. The 84% version is intended for seasoning an empty wooden humidor before cigars are added. After seasoning, you switch to the maintenance RH level that fits your storage conditions.
Frequently Asked Questions
Is Boveda 72% RH right for every humidor?
No. The 72% version is best suited to dry environments, drafty humidors, or buyers who prefer a higher moisture profile. Boveda positions 69% RH as its more general cigar-storage choice.
How many Size 60 Boveda packs should I use?
Use one Size 60 pack for every 25 items of your humidor’s rated capacity. A 50-count humidor uses two, while a 100-count humidor uses four.
Do I open the brown Boveda packet?
No. Remove the clear plastic overwrap, but do not cut or tear the brown humidity-control packet. The membrane must remain intact for the pack to work correctly.
Can I mix 72% Boveda with a different RH pack?
No. Boveda advises against mixing different RH percentages in the same enclosure because the packs can work against each other. Use one consistent RH level throughout each humidor.
How do I know when a Boveda pack is finished?
Check the packet by touch. Some hardened corners are normal, but a packet that has become completely rigid and crunchy throughout should be replaced.
Can dried-out Boveda packs be recharged?
Boveda recommends replacing spent packs rather than soaking or rehydrating them. Adding uncontrolled water can interfere with the packet’s intended humidity balance.
Can a Boveda pack touch cigars directly?
Boveda states that intact packs are safe to place directly with cigars. You can position them above or below cigars, under a tray, or inside a compatible holder as long as the packet is not damaged.
Is 72% Boveda used to season a new wood humidor?
Not as the dedicated seasoning product. Boveda recommends its 84% RH seasoning packs for conditioning an empty wooden humidor, followed by the appropriate maintenance RH once seasoning is complete.
The Bottom Line
The Boveda 72% Humidity Control Packs, Size 60, 12-Ct are a strong choice when your wooden humidor struggles to hold moisture, your climate is unusually dry, or you deliberately prefer a higher humidity target. The two-way system is simple to maintain, the Size 60 sizing rule is easy to follow, and the 12-pack works well for larger or multiple-humidor setups.
Skip this particular RH level if your airtight humidor already stays stable or you prefer the more general 69% cigar-storage target. The product itself is easy to recommend, but choosing the correct RH percentage remains the most important part of the purchase.
Ready to Buy?
Check the latest product details and make sure 72% RH matches your humidor before you decide.
