Disclosure: As an Amazon Associate, we earn from qualifying purchases. If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you.
Replacement filters can look nearly identical online, so the main question is whether the set actually matches your purifier and gives you enough filters for a complete change. The Dreduxun 4 Pack LV-H128 Replacement Filter is a third-party filter set made for the Levoit LV-H128, PUURVSAS HM669A, and ROVACS RV60. Its main advantages are a four-filter package, three-stage filtration, and tool-free replacement, but you need to verify your purifier model before ordering. This review explains the fit, filtration design, installation, maintenance, and limitations so you can decide whether the lower-cost compatible option makes sense for you.
Quick Verdict
Rating: 8/10, Recommended with caveats
Best For: Owners of compatible LV-H128, HM669A, or RV60 purifiers who want a multipack instead of a single replacement set.
Bottom Line: The four-filter package gives you two complete filter changes in a Levoit LV-H128, which uses two filters at a time. The main tradeoff is that this is a third-party compatible product rather than an official Levoit replacement, so exact model checking matters.
| Specification | Detail |
|---|---|
| Brand | Dreduxun |
| Model | LV-H128 replacement filter |
| Replacement Reference | LV-H128-RF |
| Product Type | Third-party compatible air purifier replacement filters |
| Package Quantity | 4 individual filters |
| LV-H128 Replacement Cycles | 2 complete changes because the LV-H128 uses 2 filters at a time |
| Filtration Design | Pre-filter, HEPA filter layer, and activated carbon layer |
| Seller-Stated Filtration | 99.97% of particles as small as 0.3 microns |
| Compatibility | Levoit LV-H128, PUURVSAS HM669A, ROVACS RV60 |
| Installation | Tool-free replacement |
| Replacement Guidance | Seller recommends around every 6 months, with actual timing depending on use and filter condition |
Key Takeaways
- The package contains four individual filters and provides two complete filter changes for a Levoit LV-H128.
- The filters use a three-stage design with a pre-filter, HEPA layer, and activated carbon layer.
- The listing identifies compatibility with the Levoit LV-H128, PUURVSAS HM669A, and ROVACS RV60.
- Installation requires no special tools, but filter orientation matters in the LV-H128.
- You should not wash the filter media with water. The outer pre-filter can be cleaned gently with a soft brush or vacuum when used in the LV-H128.
- This is a compatible third-party replacement, not an official Levoit-branded filter.
Before You Buy: Check the model label on your purifier. This filter set is listed for the LV-H128, PUURVSAS HM669A, and ROVACS RV60. A similar-looking Levoit purifier may use a completely different filter.
What Is the Dreduxun 4 Pack LV-H128 Replacement Filter?
The Dreduxun set is an aftermarket replacement-filter package designed around the LV-H128-RF format. It is not the air purifier itself. You receive four filter units intended to replace the filters already installed inside a compatible purifier.
The Levoit LV-H128 uses two combination filters at the same time. That makes the four-filter quantity more meaningful than the package name may suggest: you have enough filters for two full LV-H128 replacement cycles rather than four complete changes.
Each filter uses multiple filtration layers. The outer pre-filter handles larger debris, the HEPA layer targets smaller airborne particles, and activated carbon helps with common household odors. This layered design follows the basic filtration arrangement used by the LV-H128 system.
Who Should Buy It?
Best For
- You own a confirmed LV-H128, PUURVSAS HM669A, or ROVACS RV60 purifier.
- You want multiple replacement filters in one purchase.
- You prefer a third-party compatible option instead of paying specifically for an official Levoit filter.
Skip If
- Your purifier model is not one of the models listed for compatibility.
- You specifically want an official Levoit-branded LV-H128-RF replacement.
- You require independently documented filtration certification beyond the seller’s product claims.
Understanding the 3-in-1 Filtration System
Pre-Filter for Larger Debris
The outer pre-filter is the first surface exposed to incoming air. Its job is to catch larger material such as visible dust, lint, fibers, hair, and pet fur before that debris reaches the finer filtration layers.
This matters because a clogged outer surface can restrict airflow. Keeping the pre-filter reasonably clean can help you get more useful life from the complete filter assembly.
HEPA Filter Layer
The product listing describes the filter as a True HEPA design capable of capturing 99.97% of airborne particles as small as 0.3 microns. That is also consistent with the filtration specification used for the LV-H128’s original filtration system.
You should still treat this as a seller-stated specification for the Dreduxun replacement rather than proof of independent laboratory certification. The listing does not provide a verified MERV rating, so a MERV number should not be used as a reason to choose this filter.
Activated Carbon Layer
The activated carbon layer is intended to adsorb common household odors and fumes. It can be useful when the purifier runs near cooking smells, pet odors, or light smoke, but a replacement filter should not be treated as a solution for dangerous gas exposure or a substitute for proper ventilation.
Fit and Compatibility
Compatibility is the most important part of this purchase. The listing identifies three purifier models: Levoit LV-H128, PUURVSAS HM669A, and ROVACS RV60. It also references replacement part number LV-H128-RF.
Do not order only because your current filter has a similar rectangular shape. Air purifier filters can differ in thickness, sealing surfaces, airflow direction, and overall dimensions even when the purifier housings look similar.
Pro Tip: Check the model number printed on the purifier itself before removing your old filters. Matching the purifier model is more reliable than comparing product photos.
Step-by-Step Guide to Installing Your Filter
For a Levoit LV-H128, replacing the filters is a simple job, but you should pay attention to orientation. The purifier uses two filters, and both need to be installed correctly.
- Turn off and unplug the purifier. Do not work inside the unit while it is connected to power.
- Flip the purifier over and remove the filter cover. Unlock the bottom cover as directed for the LV-H128.
- Remove both old filters. Take note of how the existing filters are positioned before pulling them out.
- Clean loose dust from the housing. A vacuum with a crevice attachment can remove hair and debris inside the purifier. Do not pour water into the housing.
- Remove all plastic packaging from the new filters. Running the purifier with wrapped filters will block airflow.
- Install both replacement filters. On the LV-H128, the pre-filter faces outward and the activated carbon side faces inward. Keep the pull tabs visible and facing inward.
- Reinstall and secure the filter cover.
- Plug the purifier back in. If the filter indicator remains red after replacement, reset the filter indicator according to the purifier instructions.
On the LV-H128, the filter reminder can be reset while the purifier is plugged in with the fan turned off by pressing and holding the control button for three seconds. The reminder tracks operating time, so it is a prompt to inspect the filters rather than a direct measurement of filter condition.
Cleaning and Maintenance
Replacement timing depends on how often you run the purifier and how much dust, hair, smoke, or other airborne material it handles. The Dreduxun listing recommends changing the filters around every six months. The LV-H128 manufacturer guidance for its filtration system uses a roughly six-to-eight-month interval, with earlier replacement possible in more demanding environments.
Filter condition matters more than the calendar alone. Reduced airflow, unusual odors, increased purifier noise, or visibly clogged filter surfaces are signs that you should inspect the filters.
What You Can Clean
For the LV-H128, you can gently clean the outer pre-filter with a soft brush or a vacuum using a soft brush attachment. This removes hair, lint, and larger dust before they build up heavily.
What You Should Not Wash
Do not rinse the HEPA or activated carbon filter media with water. Moisture can damage the filter and create conditions for mold growth. The purifier housing should also be kept dry inside.
How It Performs in Real Use
For Everyday Dust and Hair
The three-stage layout makes sense for everyday bedroom, office, or small-room use because the pre-filter handles larger debris before air reaches the finer filter layers. Homes with pets or noticeable lint may require more frequent pre-filter cleaning.
For Household Odors
The activated carbon layer adds odor control alongside particle filtration. You may notice the greatest benefit when replacing an old filter that has already absorbed odors for months. Strong or persistent fumes still require source control and proper ventilation.
For Frequent Purifier Use
If you run your purifier for long periods every day, the filter may load faster than it would in occasional use. The filter reminder and calendar interval are useful starting points, but airflow and visible condition should also guide replacement timing.
For Long-Term Ownership
The four-filter quantity is convenient if you plan to keep a compatible purifier for more than one replacement cycle. For the LV-H128, storing the second pair in a clean, dry place keeps it ready for the next change.
Common Mistakes to Avoid
- Ordering based only on appearance instead of checking your purifier’s model number.
- Forgetting to remove plastic packaging from the replacement filters.
- Installing the LV-H128 filters with the filtration layers facing the wrong direction.
- Replacing only one of the LV-H128’s two filters during a complete filter change.
- Washing the HEPA or activated carbon filter media with water.
- Assuming the filter reminder means the filter must always be replaced immediately without checking its condition.
Pros and Cons
Pros
- Four individual filters provide two complete changes for the dual-filter LV-H128.
- Three-stage design combines pre-filter, HEPA, and activated carbon layers.
- Listed compatibility covers three specific purifier models.
- No special tools are required for LV-H128 filter replacement.
- Multipack format reduces the need to order another filter set after the first replacement.
Cons
- It is a third-party compatible filter rather than an official Levoit replacement.
- Compatibility is limited, so buyers with a similar Levoit model can easily order the wrong filter.
- No independent MERV rating or separate filtration certification was verified for this exact product.
Customer Support, Returns, and Warranty
The product listing states that customer support is available for questions about use. That is useful if you receive a filter that does not appear to fit as expected or need clarification about the package.
A retailer return window should not be confused with a manufacturer warranty. No independent manufacturer warranty term for this exact Dreduxun filter set was verified during this review. Check the current Amazon listing and checkout information for the return policy that applies to your purchase.
Is It Worth the Price?
This product is best viewed as a value-oriented multipack. Instead of buying only enough filters for one LV-H128 change, the four individual filters give you two complete changes. That can make the package convenient if you already know you will keep using the same purifier.
The value is less compelling if you specifically prefer original manufacturer parts or want first-party Levoit warranty support. In that case, paying more for the official LV-H128-RF may give you greater confidence in fit and manufacturer backing.
How It Compares to Alternatives
The main alternative is the official Levoit LV-H128-RF replacement filter. It is the better choice if you want a genuine Levoit part, documented manufacturer support, and a filter designed specifically for the LV-H128. The Dreduxun set makes more sense when multipack quantity and third-party value matter more to you.
You can also compare it with the PUREBURG LV-H128-RF replacement filter, another third-party compatible option sold in multi-filter configurations. With any aftermarket filter, confirm the exact purifier model and package quantity rather than assuming all LV-H128-RF listings are identical.
Frequently Asked Questions
Which air purifiers are these filters compatible with?
The product listing identifies the Levoit LV-H128, PUURVSAS HM669A, and ROVACS RV60. Check the model number on your purifier before ordering because similar-looking machines may use different filters.
Does a 4-pack mean four complete LV-H128 filter changes?
No. The Levoit LV-H128 uses two filters at the same time. Four individual filters therefore provide enough filters for two complete LV-H128 replacement cycles.
How often should you replace the filters?
The Dreduxun listing recommends replacement around every six months. Actual life depends on operating time and air conditions, so inspect the filters sooner if airflow drops, odors appear, or the filter becomes visibly clogged.
Can you wash and reuse the filters?
Do not wash the HEPA or activated carbon filter media with water. For the LV-H128, the outer pre-filter can be gently cleaned with a soft brush or vacuum attachment to remove larger dust and hair.
Which way should the filters face in a Levoit LV-H128?
For the LV-H128, install both filters with the pre-filter facing outward and the activated carbon side facing inward. The pull tabs should remain visible and face inward.
Do these filters have a MERV 4 rating?
A MERV 4 rating was not verified for this exact product and should not be used as a buying claim. The listing instead describes a three-stage system with a HEPA layer, activated carbon, and a pre-filter.
Are these genuine Levoit filters?
No. This listing identifies the product under the Dreduxun brand as a compatible replacement for the LV-H128-RF format. Choose the official Levoit LV-H128-RF if genuine manufacturer parts are important to you.
Who should skip this replacement-filter set?
Skip it if your purifier is not one of the listed compatible models or if you only use genuine manufacturer filters. It is also not the best choice if you require independently documented certification for the exact aftermarket filter you purchase.
The Bottom Line
The Dreduxun 4 Pack LV-H128 Replacement Filter is worth considering if you own a confirmed compatible purifier and want enough filters for more than one replacement cycle. Its main strengths are the four-filter quantity, three-stage design, and simple installation, while its main limitation is that it is a third-party compatible product rather than an official Levoit filter.
If model compatibility and value matter most, it earns our 8/10, Recommended with caveats verdict. If genuine Levoit parts and first-party support are priorities, the official LV-H128-RF is the safer comparison.
Ready to Buy?
Check the latest price, seller details, and compatibility information before you decide.
15winvip, huh? Thought I’d give it a shot. VIP program’s got some perks alright! Games are smooth, and the customer service was pretty responsive when I had a question. Worth a look if you’re after that VIP treatment 15winvip.